QIDI PETG-CF

QIDI PETG-CF Filament: Strong, Rigid & Easy to Print, It combines the ease of use of PETG with the strength of carbon fiber, resulting in prints that are significantly more rigid, sturdy, and resistant to bending. It offers excellent dimensional stability, precise details, and a premium matte textured finish.

Enhanced Heat & Chemical Resistance

This material inherits PETG's excellent resistance to most oils, greases, and detergents.
Its heat deflection temperature is slightly higher than that of standard PETG, allowing it to be used in higher temperature environments.

High Strength & Stiffness

The printed parts are stronger and harder than ordinary PETG or PLA, approaching the performance of some engineering plastics.

150mm/s High-Speed Printing

Say goodbye to long waits! PETG-CF supports high-speed printing at 150mm/s, helping you take the manufacturing efficiency of high-strength parts to a new level and achieve twice the result with half the effort.

Matte, Industrial Finish

The carbon fiber gives the finished product a unique matte, frosted texture with a subtle grain texture on the surface, making the appearance more "industrial" and high-end.

Easy to Print & Beginner-Friendly

Adding chopped carbon fiber provides greater dimensional stability and low shrinkage, increasing the success rate of printing large models.

Equipped with RFID chip

Equipped with RFID chip, parameters are automatically identified, saying goodbye to manual settings.

Accessory Compatibility

	Recommended	Not Recommended
Multi-color printing system	QIDI BOX	/
Support Filaments	PLA Basic	/
Build Plate	QIDI PEI Plate, QIDI Smooth Plate, QIDI Cool Plate, HF Plate, PC Plate	/
Nozzle	Hardened Steel Nozzle (0.4 / 0.6mm) Bimetal Nozzle (0.4 / 0.6/0.8mm) Tungsten Carbide Bimetal Nozzle (0.4 / 0.6/0.8mm)	Brass/Copper plated Nozzle (0.2/0.4 / 0.6/0.8mm) Any 0.2mm size Nozzle

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	65 °C，5-8 h
Nozzle Temperature	240-270 °C
Bed Temperature	70-80 °C
Printing Speed	20-150 mm/s

Physical Properties
Density	1.31 g/cm³
Melt Flow Rate	8~14g/10min
Vicat Softening Temperature	83°C
Heat Deflection Temperature	77℃

Mechanical Properties
Tensile Strength(X-Y)	57 MPa
Tensile Modulus (X-Y)	3700 MPa
Elongation at Break (X-Y)	7 %
Impact Strength (X-Y)	30 KJ/m²

Downloads

Filament TDS

Filament MSDS

Printing Tips

Pre-printing Drying: PETG-CF is highly hygroscopic.Moist filament may cause stringing and reduced strength during printing.It is recommended to dry at 65°C for 5-8 hours.For extended prints, using a dry box or continuous drying during printing is advised.
Nozzle Recommendation: The glass fiber content is highly abrasive and can quickly wear down standard brass nozzles, leading to nozzle enlargement and extrusion inaccuracies.A hardened steel nozzle or harder is recommended.

📚For more details please refer to: Filament Guide on WIKI.

Vacuum Aluminum Foil Packaging

According to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.

Product Size

QIDI TECH PETG-CF Filament 1.75mm Works perfectly with most FDM 3Dprinters on the market.

Functional Filaments Bundle Sale